The Sinar™ Farm Pro Moisture Analyzer is pre-calibrated
for 4 different commodities for results in 6 seconds.
The Sinar™ FarmPro Moisture Analyzer offers the
fastest and most convenient solution for measuring moisture
content in grains.
The principle behind the FarmPro is simplicity. When
the cell is filled and the appropriate commodity program
selected, the moisture content (%) is clearly shown
within six seconds on the liquid crystal display. The
moisture content of up to 254 samples can be averaged
in less than one second.
|
 |
The Sinar™ FarmPro also displays temperature and hectolitre
weight. An optional printer is easily connected to provide
hard copy of all results.
The instrument can be calibrated for four different commodities.
These can be adjusted independently adjusted to optimise as
required to optimise accuracy.
The Sinar™ FarmPro Moisture Analyzer works by simultaneously
sensing the capacitance, weight and temperature of the sample
being tested. Corrected moisture (%) readings are supplied
via the LCD screen in just a few seconds.
This technology allows the use of whole grains - there is
no need to grind the sample! Cereals, oilseeds, and even pulses
can be loaded directly into the measuring cell without any
sample preparation.
Being battery operated and weighing less than two kilos,
the FarmPro is portable and can be easily carried wherever
immediate and reliable results are needed.
Its robustness makes the FarmPro an ideal choice for farmers
and growers often operating in harsh and demanding environments.
|
Dimensions: 325 x 164 x 120 mm. Weight:
1.8 kg Operating environment: 0 to +55°C. |
|
Temperature correction: Thermistor sensor connected
to microprocessor. The correction is software programmable.
Temperature read out and correction 0- 50°C. Full
cell: 290 ml volume. |
|
Bias facility: Moisture content and hectolitre (bushel)
weight readings can be biased in increments of 0.1. Power
Supply: Four C size 1.5 V alkaline batteries. Optional
220/240V 50/60 Supply transformer. |
|
Measurement Range: 1-35% moisture, wet basis depending
on applications. Printer output: RS232C |
|
Accuracy: Typical standard deviation 0.3 for moisture
(dependant on application and moisture level) and 1.0
for hectolitre (bushel) |
|
Repeatability: Standard deviation 0.05 to 0.15 (on application) |
|
