The FP Auto is ideal for routine moisture analysis
in quality and process control.
This powerful microprocessor based instrument is suitable
for moisture determination in raw materials, intermediate
and finished products, providing moisture results in a
fraction of the time taken by conventional loss on drying
methods. |
 |
In most cases there is no need for any sample preparation
and once the measuring cell has been loaded and the required
commodity programme selected the moisture content (%) is shown
within six seconds on a large alphanumeric display.
As well as laboratory use the robustness of this portable
instrument makes it ideal for use in factories and production
areas where it can be used for routine moisture analysis.
|
Dimensions: 325 x 164 x 120 mm. Weight:
1.8 kg Operating environment: 0 to +55°C. |
|
Temperature correction: Thermistor sensor connected
to microprocessor. The correction is software programmable.
Temperature read out and correction 0- 50°C. Full
cell: 290 ml volume. |
|
Bias facility: Moisture content and hectolitre (bushel)
weight readings can be biased in increments of 0.1. Power
Supply: Four C size 1.5 V alkaline batteries. Optional
220/240V 50/60 Supply transformer. |
|
Measurement Range: 1-35% moisture, wet basis depending
on applications. Printer output: RS232C |
|
Accuracy: Typical standard deviation 0.3 for moisture
(dependant on application and moisture level) and 1.0
for hectolitre (bushel) |
|
Repeatability: Standard deviation 0.05 to 0.15 (on application) |
|
